| ASCEN technology co.,ltd |
Tab Bonding Machine Lcd Repairing For LCD Panel Bright Spot TV Screen
| Place of Origin: | |
|---|---|
| Brand Name: | |
| Certification: | |
| Model Number: |
| Min Order: | |
|---|---|
| Packaging: | |
| Delivery Time: | |
| Payment Terms: | |
| Supply Ability: | |
| warranty: |
| LCD Panel: | Lcd Panel Repair Machine | Type: | Laser Repair Machine |
|---|---|---|---|
| Weight: | 1200kg | Warranty: | One Year |
| Certification: | CE ISO | Power: | 220V |
Laser Repair Machine For LCD Panel Color Lines And Bright Spot TV Repaire
Main Features:
1.Point,line (length 50um),block (50um*50um)To repair the mist of polarizing film containing the LCD panel.
2.Image photographed, archive and upload .
3.Dual display electronic brake light red and red box.
4.Light gate size and the parameters of the lens ratio and laser power storage and use.
5.No fuse protection circuit breaker protection.
LCD laser repair machine (referred to as laser machine) on the LCD screen repair industry accounted for the high-end repair technology, the most high-end technology of LCD screen repair, LCD screen repair industry in addition to the COF loose welding, TAB char (This error can be repaired with a binding machine) Others such as ITO break, short line, bright line, half-line, dotted line, a multi-line laser machine can be used to repair. Laser machine with high efficiency, fixed rate, low cost (the same fault in the laser machine does not need replacement parts, (and do not affect the repair rate).
it is widely used as the main device screen repair of large-scale production factory,after sale and service company.
| Product Name | Laser TV LCD repair machine ZM-L80 |
| Working height: | ≤50mm |
| Working weight: | ≤20KG |
| Dimension: | 2245mm*1500mm*2247mm |
| Net weight: | ≤900kg |
| For LCD panel screen size: | maximum 995mm*1770mm (80 inch) |
| For LCD panel screen thick: | 0.3~2.2mm |
| Working environment temperature: | 20~30±5 |
| Work environment relative humidity: | 65 + / - 5% RH |
| Laser types: | Nd-YAG LASER |
| Wave length: | 1064/532 nm double wavelength (532 nm for adjust the optical wavelength) |
| Pulse: | Q-Switch 5n /seconds |
| Output power: | 800uJ/Pulse(100 times AVG) |
| Output power: | 800uJ/Pulse(100 times AVG) |
| LCD monitor: | The 15 " Monitor |
| Magnification: | 400,800,1600 multiple |
| Input power: | AC power 220V , 50~60Hz,25A |
| Output power: | 800uJ/Pulse(100 times AVG) |
| Vibration frequency: | 1 ~ 10 Hz/seconds |
| Objective switching system: | Mitutoyo 4 hole/electric switch mode (linear) |
| Precision optical lens group: | 5x (observed), 10x, 20x ( special for LCD repair ) |
| Output: | 21.0uJ |
| Operating Mode: | Electronic control |
| Adjust range: | 10μm |
| Light Mode: | Long/square is adjustable |
| Working range: | 905mm*1535mm*50mm (XYZ axis) |
| X, Y effective stroke: | 907mm*1538mm |
| Z axis range: | 51mm |
| Computer system: | Racks of computer, image acquisition card, Graphics Card |
| Image Capture: | SXT 403 DC12V |
| Light source: | Adjustable , coaxial light sources , light spot and LED |
| Air pressure: | 0.4 mpa |
Laser system: VD control system
LASER types: ND YAG LASER
Wave length: 1064/532 nm double wavelength (532 nm for adjust the optical wavelength)
cooling method : Water-cooled/air-cooled
laser power: 3-8 mj/Pulse
Vibration frequency: 1 ~ 20 Hz/seconds
The maximum peak power: 1mW
1064 wave amplitude: 8 ~ 6 nsec
Output power control: 512 steps for 0-100% Hi/Low switch - able
Flash Lamp Life Time: 1year or greater than 1000000 shots
Laser oscillator warranty period: 1 year
Interface: RS - 232
The actual laser configuration specifications shall prevail
