Laser LCD TV Panel Repair Machine For LCD Panel Color Lines And Bright Spot

Laser LCD TV Panel Repair Machine For LCD Panel Color Lines And Bright Spot

Repairing Type:

Laser machine, the purpose of repair is further hope to be able to correct the defective part, make originally filtered to throw away waste products, to patch the acceptable products. At the current acceptable product standards, the first is absolutely no color line defect; Second, at present many products have highlight the "no spot guarantees", therefore cannot have a pixel is always shine bright spot, but it can be a way to accept a few dark spots. So the object of laser repairing, mainly on color line defect and bright spot.

The laser repairing ways:

Welding: in a second metal overlapping across, use the appropriate energy and wavelength of laser, melt the metal parts and welding together, connecting the two electrode which was not connected (and to realize disconnection by cut off ) to realize repairing.

Equipment parameters:

Exterior size: 2320 mm * 2160 mm * 2000 mm (the actual design shall prevail)

Machine weight: 1200kg

For maximum 65 inch LCD panel screen size.

Point (3 um X 3 um), line (50 um long X 3 um), block (50 um X 50 um) repair

To repair the mist of polarizing film containing the LCD panel

Note: for different models in the control system and the laser can have relative changes of system parameters, specific solutions can be noted in the customization process.

1.Point,line (length 50um),block (50um*50um)To repair the mist of polarizing film containing the LCD panel
2.Image photographed, archive and upload
3.Dual display electronic brake light red and red box

4.Light gate size and the parameters of the lens ratio and laser power storage and use

5.No fuse protection circuit breaker protection