Straight Knife Type 2M V Cut PCB Depanelizer 20 Blade Degree No Rubbing

Straight Knife Type 2M V Cut PCB Depanelizer 20 Blade Degree No Rubbing

Description of pneumatic PCB Depanelizer machine:

This type machine were designed to depanerlize prescored panelboards carefully without bending or tension stress, even sensitive SMD components like ceramic capacitors will not be damaged by the depanning process. Due to the special design of the knives also boards with high components placed close to the edges can be depanerlized safely, Based on a proven method of depanning. wedge-shaped knives are used to cut the panets within the groove. this enables boards of less than 1mm thickness to be separated safely and without creating stress, the machine is pneumatically driven using standard parts, it is very quiet with none of the usual compressed air noises.

Feature

1. Pneumatically driven and electric control, sample design. There have sensor device in the machine, cuttting board one time with lowest cut stresses. SM-4000 apply for separate precise SMD PCBA or thin plates.

2. The straight knife type separator machines were designed to separate pre-scored panel boards carefully, without bending or tension stress. Even sensitive SMD-components like ceramic capacitors will not be damaged by the separate process, improve products quality.

Advantages:

1. The cutting rate is one segmentation for one second, controlled by pneumatic pedal switch.

2. The starting of the cutting set is for passive, so that the cutting tangent and position is under secure control. With little stress when cutting, there will no solder crack.

3. With cutting of nonroller (circular knife, straight knife ) type, there is no dust, no motor drive, and no carbon powder pollution.

4. With no-rubbing type cutting, there is no metal residue.

5. The blade can be used 600000/times without power supply, avoiding the loss and change of electrical products.

6. The machine uses 5-7kg air compressor without specific cutting place, and it is maintained by wiping its appearance with the anti-rust oil

Most of our customers Questions about PCB Depaneling Mahcine 

 
1. Q:Do you have any certification for this machine?
A:YES,We have CE ISO FCC ROHS etc.
 
2. Q:What is warranty of the machine?
A:1 year.
 
3. Q:How do you pack the machine?
A:We fix the machine on the plywood base with screws to ensure safe transportation.
 
4. Q:What is life time of machine blades?
A:About 6-12 months.
 
5. Q:What is material of blades?
A:Japan high speed steel SKH-9
 
6. Q:Can the blades be sharpened?
A:Yes, they could be re-sharpened for 2-3 times.
 
7. Q:How do you offer oversea service?
A:We could send engineer to do installation and training for client if needs.
 
8. Q:Can we see your machine in our country?
A:Yes, we would like to offer contact details of our clients who are using our machines.

No Stress PCB Depaneler Specifications:

Our V Cut PCB Separator Application

Mainly design for high components SMD PCB factory.

LED Panel,Fiber Board,Aluminium Plate,Aluminium Substrate,Copper Substrate FR4,Glass Fiber Board