| Vibration Frequency: | 1 ~ 20 Hz/seconds | Type: | Laser Repair Machine |
|---|---|---|---|
| Working Range: | 905mm*1535mm*50mm (XYZ Axis) | The Maximum Peak Power: | 1mW |
| Z Axis Range: | 51mm | Interface: | RS - 232 |
80" inch Laser Repair Machine Replacement LCD TV Screen New technology
Laser slit
Patch size: 7-65 inch
Repair the flare Min: 3 * 3 um um
OS: Windows system
HD: 500 g * 1
RAM: 2 g
Language: simplified Chinese/English
Monitor: the 19 "Monitor
The Key board: ATS standard
The Mouse: ATS standard
Note: for different models in the control system and the laser can have relative changes of system parameters, specific solutions can be noted in the customization process.
1.Point,line (length 50um),block (50um*50um)To repair the mist of polarizing film containing the LCD panel
2.Image photographed, archive and upload
3.Dual display electronic brake light red and red box
4.Light gate size and the parameters of the lens ratio and laser power storage and use
5.No fuse protection circuit breaker protection
| 7 | Vibration frequency | 1 ~ 10 Hz/seconds |
| 8 | Objective switching system | Mitutoyo 4 hole/electric switch mode (linear) |
| 9 | Precision optical lens group | 5x (observed), 10x, 20x ( special for LCD repair ) |
| 10 | Output | 21.0uJ |
| 11 | Operating Mode | Electronic control |
| 12 | Adjust range | 10μm |
| 13 | Light Mode | Long/square is adjustable |
| 14 | Working range | 905mm*1535mm*50mm (XYZ axis) |
| 15 | X, Y effective stroke | 907mm*1538mm |
| 16 | Z axis range | 51mm |
| 17 | Computer system |
Racks of computer, image acquisition card, Graphics Card
|
| 18 | LCD monitor | The 15 " Monitor |
| 19 | Image Capture | SXT 403 DC12V |
| 20 | Magnification | 400,800,1600 multiple |
| 21 | Light source | Adjustable , coaxial light sources , light spot and LED backlight module |
| 22 | Input power | AC power 220V , 50~60Hz,25A |
| 23 |
Air pressure
|
0.4 mpa |
| 24 | Warranty | 1 year ( not include the consumable parts ) |
Repairing Type:
Laser machine, the purpose of repair is further hope to be able to correct the defective part, make originally filtered to throw away waste products, to patch the acceptable products. At the current acceptable product standards, the first is absolutely no color line defect; Second, at present many products have highlight the "no spot guarantees", therefore cannot have a pixel is always shine bright spot, but it can be a way to accept a few dark spots. So the object of laser repairing, mainly on color line defect and bright spot.
The laser repairing ways:
Welding: in a second metal overlapping across, use the appropriate energy and wavelength of laser, melt the metal parts and welding together, connecting the two electrode which was not connected (and to realize disconnection by cut off ) to realize repairing.
Equipment parameters:
Exterior size: 2320 mm * 2160 mm * 2000 mm (the actual design shall prevail)
Machine weight: 1200kg
For maximum 65 inch LCD panel screen size.
Point (3 um X 3 um), line (50 um long X 3 um), block (50 um X 50 um) repair
To repair the mist of polarizing film containing the LCD panel
ASCEN technology co.,ltd specializing in the SMT automatic equipment and provide the automatic solution for the smart factory for save more producing cost.
Whether you'd like to get more info on what,why and how we do what we do, need help with what you're creating,would line to partner up or just say hi!
—--- We'd love to hear from you.
Note : Your information detail will not be published. Required fields are marked*
QQ
Skype
ASCEN