| Laser: | Programing Laser Machine | Type: | Thermode Bonding |
|---|---|---|---|
| Programing: | YES | Work Pressure:: | 0.5 ~ 0.7 Mpa |
| Panel: | Customized Size | Hot Bar Bonding: | TAB |
Laser TV LCD Repair Machine Cof Tab Bonding Machine With Programing Control
Laser LCD TV Panel Repair TAB Bonding Machine Features
1. Operator can repair while seeing physical object on device substrate by monitor because this machine equips a CCD camera (USB) with a lamp.
2. It has control function of accelerating rate and XY alignment function, so that, users can ensure traceability.
3. It can capture high resolution and high quality image because of use of CCD camera.
Laser machine with high efficiency, fixed rate, low cost (the same fault in the laser machine does not need replacement parts, (and do not affect the repair rate), it is widely used as the main device screen repair of large-scale production factory,after sale and service company.
LCD laser repair machine (referred to as laser machine) on the LCD screen repair industry accounted for the high-end repair technology, the most high-end technology of LCD screen repair, LCD screen repair industry in addition to the COF loose welding, TAB char (This error can be repaired with a binding machine) Others such as ITO break, short line, bright line, half-line, dotted line, a multi-line laser machine can be used to repair.
Main purpose
Laser repair purposes, is hoping to further the defective part to be corrected, so that the original filter out waste products to be discarded, repair to an acceptable product. The current acceptable product standards----Firstly is definitely not wired defects; secondly, many products are "no highlights assurance". Secondly, many products are "no highlights assurance", so the pixel can not have been glowing are bright spots, but to some extent accepted few dark spots. Therefore, the object of laser repair, based on the main line defect and highlights.
The way of laser repair :Welding---- In the two story metal overlap over the place, in appropriate energy and wavelength of the laser can be metalized open and welded together, let the two originally not connected electrodes connected (and cut off to achieve disconnect)to repair.
Specification
| Max. Working height | ≤50mm |
| Max. Working Weight | ≤20KG |
| Dimension | 2320×2160×2000mm |
| Net Weight | 1200 kg |
| For LCD panel screen size | maximum 110 inch (orbital platform can be expanded) |
| For LCD panel screen thick | 0.3~2.2mm |
| Repair Area |
Point (3um X 3um), Line (L 50um X 3um), Blocks (50um X 50um) Patch To repair the mist of polarizing film containing the LCD panel |
| Image system |
Image photographed, archive and upload Dual display electronic brake light red and red box Light gate size and the parameters of the lens ratio and laser power storage and use |
| Working environment temperature | 20~30±5 |
| Work environment relative humidity | 65 + / - 5% RH |
| Laser System | |
| Wave length | 1064/532 nm double wavelength (532 nm for adjust the optical wavelength) |
| Pulse | Q-Switch 5n /seconds |
| Laser power | 3-8mJ/Pulse |
| Vibration frequency | 1 ~ 20 Hz/seconds |
| Maximum peak power | 1mW |
| Objective switching system | Mitutoyo 4 hole/electric switch mode (linear) Precision optical lens group |
| Output | 21.0uJ |
| Operating Mode | Electronic control |
| Adjust range | ± 10μm |
| Light Mode | Long/square is adjustable |
| Working platform | |
| Working platform size | 1250mm*900mm |
| Z axis range | 100 mm |
| Operating Mode | XY axis manual , Z axis manual |
| Optical imaging system | |
| Microscope/laser processing special type | CCD 1/2”color CCD |
| Episcopic light source | halogen light source system of high brightness (100W) |
| Transmission light source | halogen light source system of high brightness (150W) |
| Guide Light | halogen light source system of high brightness (100W) |
| Objective lens switching system 4 holes/Electric switchable type(linear) | Precision lens group 5 times/10 times/20 times/50 times/ |
| Electrical specifications | |
| Input power | AC power 220V , 50~60Hz, 30A |
| Air pressure | 0.4 MPa |
| Warranty |
1 year ( not include the consumable parts ) |
ASCEN technology co.,ltd specializing in the SMT automatic equipment and provide the automatic solution for the smart factory for save more producing cost.
Whether you'd like to get more info on what,why and how we do what we do, need help with what you're creating,would line to partner up or just say hi!
—--- We'd love to hear from you.
Note : Your information detail will not be published. Required fields are marked*
QQ
Skype
ASCEN