SMT Machinery PCB Depaneling Machine Without Stress During PCB Cutting

SMT Machinery PCB Depaneling Machinery Without Stress During PCB Cutting

1. Nice for cutting v cut metal board,Aluminium PCB,LED strip,Copper PCB etc.
 

2. Separate rigid and thick board fluently.
 

3. Use pneumatic-driven and electromagnetic valve to operate.

This pneumatic type separator, we use the most advanced non-stress idea to designed it, it’s help to prevent the chap phenomena as the PCB separated by the general separator, it’s improve the PCB’s quality maximumly. It’s use the link-pole to increase the strength, it’s been driven by a small cylinder, it’s need a little gas, but the shear force is very strong. The upper and lower blade is linear blade, it’s can adjust the gap of the upper and lower blade from 0.1mm to 4.3mm. it’s fit in all kinds of different thickness’s PCB, it’s produced by lead-free materials. We can customized by the customer’s special demand, and to resolve the problems of the tin point, the parts or the circuitry of the PCB when separate the combined PCB and causes the risk of stress. It’s used to groove v-cut’s PCB, the structure is very strong, the balde and guide can make an adjustment for match the PCB, The separate speed can control by the user.

pcb depanelizer machine features:

1.  Easy operation, no security problems.

2.  Cutting speed is 1s / 1 cut, countrolled by foot pneumatic switch.

3.  It can cut PCB of any length, small stress, no cutting deformation.

4.  Electropneumatic design. Two blades cut, specially for seperating sophisticated thin Aluminum PCB

5.  Guillotine type working mode, appliable for PCB of any thickness.

6.  No motor drive, the machine wont's be warm.

Our PCB Depanelizer Service
 

1. because of the multiple cutting, cutting process is very smooth and greatly improves the capability of position of V-CUT groove .
Even if with shallow slot V-CUT groove the board won t jump out of blade, avoiding adverse.

2. Because cutting force of the blade is small. abd with high speed steel material which is imported from the Swedish. durability of the blade greatly improved , and the lifetime can be one year or more when cutting the aluminum board.

3. All the cutting blades are calibrated by Excitation double-frequency laser interference measurement instrument. Ensure that the latter knife can accurately continue to cut in the slots which already cut by the former knife.The jitter of knife point is less than 0.02mm. Ensure perfect cutting quality.