0.8MM - 3.5MM Thickness PCB V Cut Machine With Adjustable Rotary Knob

0.8MM - 3.5MM Thickness PCB V Cut Machine With Adjustable Rotary Knob

V Cut PCB Separator Machine Features
 

1. One touch programming of cut length with digital display
 

2. Separating speed is adjusted by a rotary knob
 

3, Board with projected component can be cut precisely
 

4. Large stainless steel platform on both side of cutting blade prevents board wobble and table height and angle are adjustable
 

5. Clearance between circular and linear blades are adjustable to fit different groove depth and compensates for blade wear out

 PCB Depaneling Machine Operation Manual

1. Fix the machine on level and stable work stand.

2.Adjustment the distance between upper blade and bottom blade: Adjust the lifting button to make the upper blade move down (when counterclockwise turning button, the upper blade move down and vice versa), Keep distance to 0.01-0.15mm between the upper blade and bottom blade(note: the distance has been set default to 0.05-0.1mm). Never make the upper blade contact with bottom blade vertically to prevent from blade damage.

3.Adjustment of bottom blade protector limit: slightly unscrew the fastening screw on bottom blade, adjust the blade protector to be 0.2-0.3mm lower than the top of V shape then lock the bottom blade.

4.Adjustment of upper blade protector limit:

(a),Adjustment of upper blade protector limit for Model ZO/KO:Slightly unscrew the fastening screw on upper blade,keep PCB V-CUT line align with the V top of upper blade protector limit and bottom blade protector limit, pull back and forth of PCB, at the same time, adjust the upper direction, when feel the moving with some resistance then lock the fasten screw.

(b),Adjustment of upper blade protector limit for Model ZW/KW:Slightly unscrew the fastening screw on upper blade, keep PCB V-CUT line align with the V top of upper blade protector limit and bottom blade protector limit, pull back and forth of PCB, at the same time, adjust the micro adjuster, when feel the moving with some resistance then lock the fasten screw.

5,Machine START:Open the Ship shape power switch, then switch on the toggle switch, slightly turn the speed button, make the bottom blade run slowly, slightly push the PCB by hand, and make the cutting motion start and carefully monitor the cutting effect, if PCB cutting is not thoroughly, repeat the step of 2~4 to adjust the distance to a proper position between upper blade and bottom blade. When the cutting effect is good, may increase the running speed.

6,After cutting, please press the separated PCBs to prevent PCB fallen and cause component damage on PCB

V Cut PCB Depaneling machine specification:
 

 
 
Customers FAQ About PCB Separator 
 
1. Q:Do you have any certification for this machine?
A:YES,We have CE ISO FCC ROHS etc.
 
2. Q:What is warranty of the machine?
A:1 year.
 
3. Q:How do you pack the machine?
A:We fix the machine on the plywood base with screws to ensure safe transportation.
 
4. Q:What is life time of machine blades?
A:About 6-12 months.
 
5. Q:What is material of blades?
A:Japan high speed steel SKH-9
 
6. Q:Can the blades be sharpened?
A:Yes, they could be re-sharpened for 2-3 times.
 
7. Q:How do you offer oversea service?
A:We could send engineer to do installation and training for client if needs.
 
8. Q:Can we see your machine in our country?
A:Yes, we would like to offer contact details of our clients who are using our machines.
 
Our PCB Depanelizer Service