SMT PCB Cutting Machine With Conveyor Belt 500 mm / Sec Feed Rate

 
 
SMT PCB Cutting Machine With Conveyor Belt 500 mm / Sec Feed Rate
 

Advantages:

After soldering the plate of connecting pieces, it often hurts lines or breaks the electronic parts when breaking. This machine cuts with feed mode to reduce stress drastically, prevent the solder joint and parts from cracking and improve the productivity and quality.

With circle knife above and linear blade below, when the board flow to the anvil blade, shift the switch, and the anvil blade move laterally to the set point, then the PCB board is cut off with smooth incision and no burrs.

Key Function of Our PCB Separator

1.  The tailgate depth range: unlimited. The largest plate cutting width: unlimited,the maximum cutting length: 500mm, the plate thickness: 0.25-3.5mm. The thickness between V groove: 0.25-2.0mm.
 

2. The feed distance of the knife wheel is from 0 to 500mm(the tool length can be customized ) . The height of the knife wheel is fine-tuning from 0 to 2mm,so that it is suitable for PCB of various kinds of thickness and the depth of V-CUT groove. The height of work station is regulable from 0 to 50mm.

3. Four different pcb separation speed you can preset in the large LCD Display

4. Safe sensor can greatly protect your safety.

Basic maintenance:

1. After the completion of the work, please turn off the power supply and remove scraps.

2. Pay attention to the protection of upper and lower cutters.

3. When the machine is out of work for a long time, please remove the upper and lower cutters and coat with oil to protect. Please wipe it before use.

4. Pay attention to checking the fastening of all screws

V Cut PCB Depaneling machine specification:
 

 
 
Customers FAQ About PCB Separator
 
1. Q:Do you have any certification for this machine?
A:YES,We have CE ISO FCC ROHS etc.
 
2. Q:What is warranty of the machine?
A:1 year.
 
3. Q:How do you pack the machine?
A:We fix the machine on the plywood base with screws to ensure safe transportation.
 
4. Q:What is life time of machine blades?
A:About 6-12 months.
 
5. Q:What is material of blades?
A:Japan high speed steel SKH-9
 
6. Q:Can the blades be sharpened?
A:Yes, they could be re-sharpened for 2-3 times.
 
7. Q:How do you offer oversea service?
A:We could send engineer to do installation and training for client if needs.
 
8. Q:Can we see your machine in our country?
A:Yes, we would like to offer contact details of our clients who are using our machines.
 
Why Clients Buy Our PCB Separator 
 
1. It is safty, Separates large numbers of PCBs without fatigue of the operator
 
2. Motor driven
 
3. The PCB is feed between the circular blades where it is seized, transported and separated
 
4. Different speeds can be selected
 
5. We can made plate according the customers requirement .
 
 
Our PCB Depanelizer Service