LED Panel PCB Separator Machine With Six Circular High Speed Blades

Name: LED Panel PCB Separator Machine With Six Circular High Speed Blades

 

 

1.  two blades(up and down) each group,work as a Unit.

 

    The whole process divides into three phases: A, B and C. Firstly Group-A separate 40%,

 

    Group-B follows to separate next 40% along the same V-slot of Group-A, Balance 20% finishes 

 

    by Group-C. Since each separation is short , internal strength decreased 80% compared with old way of
     separation, in this way, the Board won`t get deformed, especially the Board of Aluminum.

 

2. Due to multi times of separation, the whole process is really stable, bad situation is avoided, which means

 

    blades won`t jump out of shallow V-slot.

 

3. Blades made by high speed steel imported from Germany, life would be over one year

 

4. All blades are calibrated by dual-frequency laser interferometer,

 

    it ensures blades can accurately move along the same slot that previous blade worked on.

 

    Blade tip jump would be limited within 0.02mm,

 

    to ensure separation quality.

 

5. simple operation, swift separation

 

6. Able to extraly configure platform of stainless steel, of size 1.2 meter and 2.4 meter.

 

7. Slight accurate adjustment of up and down blade, 

 

8. Blades can be sharpened for many times after worn

 

9. Block part custom-made for convenient separation on PCB of different width 

 

10.Free adjustment on X and Y axis, raise the accuracy of separation

 

11.Professionally Multi Blades PCB V-cut Machine for LED Board